Asahi Kasei Microdevices Corporation (AKM) and Silicon Austria Labs GmbH (SAL) has completed a joint proof of concept of the eFuse technology in high-voltage applications utilizing silicon carbide (SiC)- based power devices. The results show that the eFuse technology can significantly improve safety, as well as reduce material and maintenance costs of systems such as on-board chargers (OBC) in automobiles.
The popularity of silicon carbide (SiC)- and gallium nitride (GaN)-based power devices in electric vehicles and other high-voltage applications is on the rise. This makes it necessary to replace mechanical fuses – which have been utilized with conventional silicon (Si) based power converters – to immediately shut down the system when detecting an overcurrent, protecting the devices and avoiding costly maintenance.
AKM is producing the CZ39, a coreless current sensor with a response time of 100 ns. Its fast response capability and high accuracy allow for precise detection of overcurrents and quick system shutdown. In a joint technical verification together with the Austrian research center SAL, AKM has developed the eFuse system which solves the challenges of conventional protection systems using mechanical fuses. This solution provides the overcurrent and short circuit protection required for next-generation high-voltage EV systems with SiC- and GaN-based power devices, such as OBCs. Furthermore, the current sensor integrated into the eFuse can efficiently regulate the current in connected subsystems, thereby reducing the overall part count.
“With this joint technology validation, we have set a new standard for eFuse technology, and we are proud to combine AKM’s expertise with SAL’s research capabilities to achieve this innovative result. We expect that the eFuse technology will contribute to smaller and lighter EV onboard chargers,” said Toshinori Takatsuka, General Manager of AKM’s current sensor business.
“By utilizing the latest AKM current sensing technologies, we can improve the reaction time of eFuses and the protection of wide-bandgap power converters,” said Thomas Langbauer, Team Lead within the Power Electronics Division at SAL.
AKM will present the results of the joint research with SAL from June 11-13 at PCIM Europe 2024 in Nuremberg, Germany (Hall 7, booth 502). In addition, the two companies are discussing further steps as they anticipate a positive market impact.